NLV14175BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 4175 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Clock Frequency | 14MHz |
| Propagation Delay | 500 ns |
| Turn On Delay Time | 70 ns |
| Current - Quiescent (Iq) | 20μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 8.8mA 8.8mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 120ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV14175BDR2G Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). You can find it in the Tape & Reel (TR)package. Currently, the output is configured to use Differential. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 3V~18V. -55°C~125°C TAis the operating temperature. This logic flip flop is classified as type D-Type. FPGAs belonging to the 4000Bseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 14MHz. A total of 1elements are contained within it. There is a consumption of 20μAof quiescent energy. It has been determined that there have been 16 terminations. It is a member of the 4175 family. The power supply voltage is 5V. Its input capacitance is 5pFfarads. It is mounted by the way of Surface Mount. It is designed with 16 pins. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. The supply voltage (Vsup) should be maintained above 3V for normal operation. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL.
NLV14175BDR2G Features
Tape & Reel (TR) package
4000B series
16 pins
NLV14175BDR2G Applications
There are a lot of ON Semiconductor NLV14175BDR2G Flip Flops applications.
- Memory
- Frequency Divider circuits
- Balanced 24 mA output drivers
- Guaranteed simultaneous switching noise level
- Communications
- Storage registers
- Buffered Clock
- Count Modes
- Safety Clamp
- Pattern generators
