NLV17SZ74USG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100, 17SZ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 17SZ74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Propagation Delay | 14.5 ns |
| Quiescent Current | 1μA |
| Turn On Delay Time | 2.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 7.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| fmax-Min | 250 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 800μm |
| Length | 2.1mm |
| Width | 2.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV17SZ74USG Overview
The flip flop is packaged in 8-VFSOP (0.091, 2.30mm Width). You can find it in the Tape & Reel (TR)package. It is configured with Differentialas an output. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 1.65V~5.5V volts, it operates. It is operating at a temperature of -55°C~125°C TA. D-Typeis the type of this D latch. It belongs to the Automotive, AEC-Q100, 17SZseries of FPGAs. You should not exceed 200MHzin its output frequency. In 8terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 17SZ74. It is powered from a supply voltage of 1.8V. Its input capacitance is 7pFfarads. Devices in the LVC/LCX/Zfamily are electronic devices. This electronic part is mounted in the way of Surface Mount. The 8pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. It is designed with a number of bits of 1. As soon as 5.5Vis reached, Vsup reaches its maximum value. The superior flexibility is achieved through the use of 1 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. An electrical current of 3.3V volts is applied to it. As a result, it consumes 1μA of quiescent current without being affected by external factors.
NLV17SZ74USG Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 17SZ series
8 pins
1 Bits
3.3V power supplies
NLV17SZ74USG Applications
There are a lot of ON Semiconductor NLV17SZ74USG Flip Flops applications.
- Test & Measurement
- Synchronous counter
- Computing
- Circuit Design
- QML qualified product
- Reduced system switching noise
- Matched Rise and Fall
- Modulo – n – counter
- Event Detectors
- Convert a momentary switch to a toggle switch
