Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
Series |
Automotive, AEC-Q100, 74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Decoder/Demultiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Decoder/Drivers |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Circuit |
1 x 3:8 |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Family |
HC/UH |
Logic Function |
Decoder, Demultiplexer |
Current - Output High, Low |
5.2mA 5.2mA |
Supply Type |
Single |
Output Polarity |
INVERTED |
Max I(ol) |
0.004 A |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Input Conditioning |
STANDARD |
Length |
5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NLV74HC138ADTR2G Overview
Providing this information in the 16-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.The package is packaged in the manner of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.With a supply voltage of 2V~6V, designers have greater flexibility of digital controlled switch.As a member of Automotive, AEC-Q100, 74HC series, the multiplexers can be used for a wide range of applications.There is a design for terminating 16 as part of its basic configuration.For multiplexer's system, 5V voltage is supplied.A component pin count of 16 is found on this turn signal switch.As a result, GULL WING represents the end of the conductors.There is a type of supply Single that is employed in this case.With 16 pins, it is configured.This unit is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the HC/UH family.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.In order to maintain mux switch's normal operation, power is provided to 2/6V.Decoder/Drivers is a category for the digital switch ics.Currently, the switches is packaged in accordance with the TAPE AND REEL method.
NLV74HC138ADTR2G Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
NLV74HC138ADTR2G Applications
There are a lot of ON Semiconductor NLV74HC138ADTR2G Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- Solenoid cooling fan
- Frequency multiplexing system
- Relay
- Logic gates for other digital devices
- Make full adder
- Code conversion
- Audio transmission
- Transmission from the computer system of a satellite
- Textile mills