NLV74HC151ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Data Selector/Multiplexer |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 56 ns |
| Propagation Delay (tpd) | 280 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74HC151ADR2G Overview
This is a relatively small item of digital switch that is included in the 16-SOIC (0.154, 3.90mm Width) in order to save space on the board.The package is in the form of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.For the analog part of the multiplexers, an IC Data Selector/Multiplexer is used.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.A supply voltage of 2V~6V provides digital controlled switch's superior flexibility for designers.Multiplexers in the Automotive, AEC-Q100, 74HC series are suitable for a wide range of applications.As parts of its basic configuration, 16 terminations are desgined.In multiplexer's system, 4.5V is the voltage supplied.This turn signal switch consists of 16 component pins.As a result, GULL WING represents the end of the conductors.In this case, the supply type is Single.There are 16 pins on it.It is mounted in the way of Surface Mount.Among the family of HC/UH the logic switch is a member.The minimal supply voltage (Vsup) should be kept at 2V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 6V to prevent unnecessary failures.It is provided that 2/6V has a power supply in order to function normally.The turn signal switch operates with 1 outputs.Multiplexer/Demultiplexers is a category for the digital switch ics.A TAPE AND REEL packaging method is used in the switches.
NLV74HC151ADR2G Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
NLV74HC151ADR2G Applications
There are a lot of ON Semiconductor NLV74HC151ADR2G Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- GLAN
- Electronic circuits
- Electronics industry
- Frequency multiplexing system
- HD surveillance system
- High-performance memory-decoding applications
- To select different devices in microprocessor output
- Solenoid cooling fan
- RF-based home automation system
