NLV74HC151ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Data Selector/Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer/Demultiplexers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 56 ns |
| Propagation Delay (tpd) | 280 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74HC151ADTR2G Overview
For the purpose of saving board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The analog IC in the multiplexers is identified as Data Selector/Multiplexer.By keeping the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.With a supply voltage of 2V~6V, designers have greater flexibility of digital controlled switch.These multiplexers are members of the Automotive, AEC-Q100, 74HC series, which provide extensive application potential.The basic configuration of this system includes 16 terminations.For multiplexer's system, a voltage of 4.5V is supplied.There are 16 component pins in this turn signal switch.It employs GULL WING as the point at which conductors come to an end.Its supply type is Single, which is used as the source of power.The board is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of HC/UH.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2V.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.It is provided that 2/6V has a power supply in order to function normally.There are 1 outputs designed to operate the turn signal switch.The digital switch ic is an electronic part classified into Multiplexer/Demultiplexers.The switches packaging is based on TAPE AND REEL.
NLV74HC151ADTR2G Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
NLV74HC151ADTR2G Applications
There are a lot of ON Semiconductor NLV74HC151ADTR2G Signal Switches / Multiplexers / Decoders applications.
- Telephone network
- GLAN
- HD surveillance system
- Data collection system
- Implementing boolean functions with multiple variables
- Video transmission
- Microprocessor instruction decoding
- To select different devices in microprocessor output
- Code conversion
- To select different devices in microprocessor input
