NLV74HC157ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Data Selector/Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Family | HC/UH |
| Logic Function | Multiplexer |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 32 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74HC157ADTR2G Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.In this case, it is packaged as Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.the multiplexers uses an analog IC Data Selector/Multiplexer.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~6V supply voltage.With the Automotive, AEC-Q100, 74HC series, the multiplexers are suitable for a diverse range of applications.There is a design for terminating 16 as part of its basic configuration.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch has a total of 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.Single is employed as its supply type.This multiplexer ic is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.In the HC/UH family, the logic switch is included.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.A power supply is provided for mux switch's normal operation of 2/6V.The turn signal switch operates with 1 outputs.A TAPE AND REEL packaging method is used in the switches.
NLV74HC157ADTR2G Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/6V
NLV74HC157ADTR2G Applications
There are a lot of ON Semiconductor NLV74HC157ADTR2G Signal Switches / Multiplexers / Decoders applications.
- Transmission from the computer system of a satellite
- Video transmission
- Home automation system
- Data communication
- Automatic Monitoring systems
- Recording transmission
- Speed control of medern motors
- Memory system of computers
- A/D converters
- GLAN
