NLV74HC174ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Clock Frequency | 35MHz |
| Propagation Delay | 27 ns |
| Quiescent Current | 4μA |
| Family | HC/UH |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74HC174ADTR2G Overview
It is embeded in 16-TSSOP (0.173, 4.40mm Width) case. There is an embedded version in the package Tape & Reel (TR). In the configuration, Non-Invertedis used as the output. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. It is operating at a temperature of -55°C~125°C TA. This D latch has the type D-Type. This type of FPGA is a part of the Automotive, AEC-Q100 series. You should not exceed 35MHzin the output frequency of the device. D latch consists of 1 elements. Currently, there are 16 terminations. A voltage of 5V provides power to the D latch. There is 10pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as HC/UH. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. Its clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. 6Vis the maximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. 4μAquiescent current consumed.
NLV74HC174ADTR2G Features
Tape & Reel (TR) package
Automotive, AEC-Q100 series
16 pins
NLV74HC174ADTR2G Applications
There are a lot of ON Semiconductor NLV74HC174ADTR2G Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Pattern generators
- 2 – Bit synchronous counter
- Reduced system switching noise
- Counters
- ESCC
- Data storage
- ESD performance
- Data transfer
- Balanced 24 mA output drivers
