NLV74HC175ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Clock Frequency | 35MHz |
| Turn On Delay Time | 28 ns |
| Family | HC/UH |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 22ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74HC175ADTR2G Overview
The item is packaged in 16-TSSOP (0.173, 4.40mm Width)cases. The Tape & Reel (TR)package contains it. T flip flop uses Differentialas the output. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. The supply voltage is set to 2V~6V. In this case, the operating temperature is -55°C~125°C TA. The type of this D latch is D-Type. It belongs to the 74HCseries of FPGAs. It should not exceed 35MHzin terms of its output frequency. A total of 1elements are present in it. T flip flop consumes 4μA quiescent energy. A total of 16 terminations have been made. The 74HC175family includes it. The power supply voltage is 5V. Its input capacitance is 10pFfarads. Electronic devices of this type belong to the HC/UHfamily. Electronic part Surface Mountis mounted in the way. A total of 16pins are provided on this board. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. Vsup reaches its maximum value at 6V. A normal operating voltage (Vsup) should remain above 2V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. A total of 2/6V power supplies are needed to run it.
NLV74HC175ADTR2G Features
Tape & Reel (TR) package
74HC series
16 pins
2/6V power supplies
NLV74HC175ADTR2G Applications
There are a lot of ON Semiconductor NLV74HC175ADTR2G Flip Flops applications.
- Computers
- Functionally equivalent to the MC10/100EL29
- Pattern generators
- Test & Measurement
- Safety Clamp
- Counters
- Single Up Count-Control Line
- Communications
- Registers
- Buffer registers
