NLV74HC374ADTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 35MHz |
| Turn On Delay Time | 21 ns |
| Family | HC/UH |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 7.8mA 7.8mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74HC374ADTR2G Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. The Tape & Reel (TR)package contains it. The output it is configured with uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. Surface Mountis occupied by this electronic component. With a supply voltage of 2V~6V volts, it operates. In the operating environment, the temperature is -55°C~125°C TA. D-Typedescribes this flip flop. FPGAs belonging to the Automotive, AEC-Q100, 74HCseries contain this type of chip. A frequency of 35MHzshould be the maximum output frequency. In total, it contains 1 elements. Despite external influences, it consumes 4μAof quiescent current. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74HC374 family contains this object. A voltage of 5V is used as the power supply for this D latch. The input capacitance of this JK flip flopis 10pF farads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. There is an electronic component mounted in the way of Surface Mount. 20pins are included in its design. Its clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. The maximal supply voltage (Vsup) reaches 6V. A normal operating voltage (Vsup) should remain above 2V. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. The D latch runs on a voltage of 2/6V volts. The flip flop has 2ports embedded within it.
NLV74HC374ADTR2G Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74HC series
20 pins
2/6V power supplies
NLV74HC374ADTR2G Applications
There are a lot of ON Semiconductor NLV74HC374ADTR2G Flip Flops applications.
- Bus hold
- Consumer
- Data Synchronizers
- Dynamic threshold performance
- Count Modes
- Instrumentation
- Registers
- EMI reduction circuitry
- Modulo – n – counter
- Automotive
