NLV74HC374ADWG
| Parameters | |
|---|---|
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 35MHz |
| Propagation Delay | 21 ns |
| Quiescent Current | 4μA |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
NLV74HC374ADWG Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). You can find it in the Tubepackage. There is a Tri-State, Non-Invertedoutput configured with it. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. The supply voltage is set to 2V~6V. -55°C~125°C TAis the operating temperature. D-Typedescribes this flip flop. This type of FPGA is a part of the Automotive, AEC-Q100, 74HC series. A frequency of 35MHzshould not be exceeded by its output. D latch consists of 1 elements. It has been determined that there have been 20 terminations. Power is provided by a 5V supply. The input capacitance of this JK flip flopis 10pF farads. It belongs to the family of electronic devices known as HC/UH. The electronic part is mounted in the way of Surface Mount. There are 20pins on it. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. The maximal supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. In view of its reliability, this D flip flop is a good fit for RAIL. The power supply is 2/6V. This D flip flop is equipped with 0 ports. Quiescent current is consumed by the D latch in the amount of 4μA.
NLV74HC374ADWG Features
Tube package
Automotive, AEC-Q100, 74HC series
20 pins
2/6V power supplies
NLV74HC374ADWG Applications
There are a lot of ON Semiconductor NLV74HC374ADWG Flip Flops applications.
- Bus hold
- Asynchronous counter
- 2 – Bit synchronous counter
- QML qualified product
- Individual Asynchronous Resets
- Test & Measurement
- Frequency division
- Common Clocks
- Safety Clamp
- Set-reset capability
