NLV74HC374ADWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 35MHz |
| Propagation Delay | 21 ns |
| Quiescent Current | 4μA |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74HC374ADWR2G Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. You can find it in the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. The JK flip flop operates at 2V~6Vvolts. It is operating at -55°C~125°C TA. This electronic flip flop is of type D-Type. JK flip flop belongs to the Automotive, AEC-Q100, 74HCseries of FPGAs. A frequency of 35MHzshould not be exceeded by its output. In total, it contains 1 elements. The number of terminations is 20. Power is provided by a 5V supply. There is 10pF input capacitance for this T flip flop. HC/UHis the family of this D flip flop. It is mounted in the way of Surface Mount. This board is designed with 20pins on it. It has a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The maximal supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be above 2V. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. It operates from 2/6V power supplies. A D flip flop with 2embedded ports is available. As a result, it consumes 4μA of quiescent current without being affected by external factors.
NLV74HC374ADWR2G Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74HC series
20 pins
2/6V power supplies
NLV74HC374ADWR2G Applications
There are a lot of ON Semiconductor NLV74HC374ADWR2G Flip Flops applications.
- Divide a clock signal by 2 or 4
- 2 – Bit synchronous counter
- Instrumentation
- Counters
- Guaranteed simultaneous switching noise level
- Control circuits
- Automotive
- Pattern generators
- Computers
- Latch
