banner_page

NLV74HC4051ADR2G

100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MC74HC4051A 16 Pins 200nA 3V 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NLV74HC4051ADR2G
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 398
  • Description: 100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MC74HC4051A 16 Pins 200nA 3V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Channel Capacitance (CS(off), CD(off)) 130pF
On-state Resistance Match-Nom 12Ohm
Channel-to-Channel Matching (ΔRon) 10 Ω
Crosstalk -60dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 345ns
Switch-off Time-Max 220ns
Signal Current-Max 0.025A
Length 9.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -55°C~125°C TA
Packaging Tape & Reel (TR)
Published 2007
Series Automotive, AEC-Q100
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Terminal Finish Tin (Sn)
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 3V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number MC74HC4051A
Pin Count 16
Qualification Status Not Qualified
Number of Channels 8
Number of Circuits 1
Max Supply Voltage 6V
Min Supply Voltage 2V
Analog IC - Other Type SINGLE-ENDED MULTIPLEXER
Power Dissipation 500mW
Number of Inputs 8
Voltage - Supply, Single/Dual (±) 2V~6V ±2V~6V
Halogen Free Halogen Free
Neg Supply Voltage-Nom (Vsup) -4.5V
Max Dual Supply Voltage 6V
-3db Bandwidth 80MHz
On-State Resistance (Max) 100Ohm
Min Dual Supply Voltage 1V
Multiplexer/Demultiplexer Circuit 8:1
Off-state Isolation-Nom 40 dB
Current - Leakage (IS(off)) (Max) 200nA

NLV74HC4051ADR2G Overview


Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operating temperature around -55°C~125°C TA extended. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 8 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. 1 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with MC74HC4051A if you are looking for variants. You can find the functions of the 16 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 6V voltage to the switch device. In order for the electronic part to function properly, the lowest voltage should be 2V. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. For dual power supplies, a voltage of at least 1V should be attached. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. Among the inputs that can be operated are the 8 inputs. The Automotive, AEC-Q100 series contains it.

NLV74HC4051ADR2G Features


8 Channels
-3db Bandwidth: 80MHz

NLV74HC4051ADR2G Applications


There are a lot of ON Semiconductor NLV74HC4051ADR2G Analog Switches & Multiplexers ICs applications.

  • Communication systems
  • Industrial
  • Multi-Line E1 Interface Cards
  • MP3 players
  • DVD-R
  • T1/E1 Terminals
  • ISDN NT1/TA
  • New designs requiring multiplexer functions
  • Microwave transmission systems
  • Cell phones

Write a review

Note: HTML is not translated!
    Bad           Good