NLV74HC4066ADR2G
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MC74HC4066A |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Logic Function | Demux, Mux |
| Halogen Free | Halogen Free |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 20Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 15 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 100ns |
| Switch-off Time-Max | 110ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
NLV74HC4066ADR2G Overview
The electronic component is convenient to ship overseas because it is packed in a 14-SOIC (0.154, 3.90mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 1:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, there are 14 terminations. By its 1 channels, the electronic component provides high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. A total of 14 pins are injected into the electrical part body. Multiplexers built on a SPST - NO switching circuit are built. The circuits in this analogue multiplexer number 4. Try searching for MC74HC4066A variants of the analog switch ic. The functions of 14 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage of 2V~12V is required for this switch device, which drains from a single voltage source. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Operating voltages range from 12V. The Automotive, AEC-Q100 series includes it.
NLV74HC4066ADR2G Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 160MHz
NLV74HC4066ADR2G Applications
There are a lot of ON Semiconductor NLV74HC4066ADR2G Analog Switches & Multiplexers ICs applications.
- ATM
- Cable PC
- High-Voltage
- Communications systems
- SDH/SONET multiplexers
- Fiber In The Loop (FITL)
- Microprocessor Controlled Analog Systems
- Routers
- Fault Tolerant Systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
