NLV74HCT574ADWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 30MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 30ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 45 ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74HCT574ADWG Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. The package Tubecontains it. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis occupied by this electronic component. It operates with a supply voltage of 4.5V~5.5V. Currently, the operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74HCT series. A frequency of 30MHzshould be the maximum output frequency. D latch consists of 1 elements. T flip flop consumes 4μA quiescent energy. There are 20 terminations,It is powered from a supply voltage of 5V. The input capacitance of this JK flip flopis 10pF farads. An electronic device belonging to the family HCTcan be found here. In this case, the maximum supply voltage (Vsup) reaches 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. A total of 2ports are embedded in the D flip flop.
NLV74HCT574ADWG Features
Tube package
74HCT series
NLV74HCT574ADWG Applications
There are a lot of ON Semiconductor NLV74HCT574ADWG Flip Flops applications.
- Divide a clock signal by 2 or 4
- Power down protection
- CMOS Process
- Pattern generators
- Shift registers
- Data Synchronizers
- EMI reduction circuitry
- QML qualified product
- Control circuits
- Buffer registers
