NLV74HCT74ADG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 30MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 24ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 36 ns |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74HCT74ADG Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. It is contained within the Tubepackage. Currently, the output is configured to use Differential. It is configured with the trigger Positive Edge. Surface Mountmounts this electrical part. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of -55°C~125°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74HCT series. A frequency of 30MHzshould be the maximum output frequency. In total, it contains 2 elements. Despite external influences, it consumes 2μAof quiescent current. Terminations are 14. Power is provided by a 5V supply. A JK flip flop with a 10pFfarad input capacitance is used here. This D flip flop belongs to the family of HCT. There are 14pins on it. Vsup reaches 5.5V, the maximal supply voltage. Normal operation requires a supply voltage (Vsup) above 4.5V.
NLV74HCT74ADG Features
Tube package
74HCT series
14 pins
NLV74HCT74ADG Applications
There are a lot of ON Semiconductor NLV74HCT74ADG Flip Flops applications.
- Buffer registers
- Frequency division
- Single Up Count-Control Line
- Memory
- CMOS Process
- Balanced 24 mA output drivers
- Reduced system switching noise
- ESCC
- ESD protection
- Patented noise
