NLV74LCX374DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Propagation Delay | 8.5 ns |
| Quiescent Current | 10μA |
| Family | LVC/LCX/Z |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.024 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74LCX374DTR2G Overview
20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. There is an embedded version in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas the output. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~3.6V. -40°C~85°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. JK flip flop is a part of the Automotive, AEC-Q100series of FPGAs. In order for it to function properly, its output frequency should not exceed 150MHz. The list contains 1 elements. There are 20 terminations,The D flip flop is powered by a voltage of 3.3V . The input capacitance of this T flip flop is 7pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Electronic devices of this type belong to the LVC/LCX/Zfamily. This electronic part is mounted in the way of Surface Mount. There are 20pins on it. The clock edge trigger type for this device is Positive Edge. This device has the base part number FF/Latches. 3.6Vis the maximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 2V. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. There are 2 ports embedded in the flip flops. High efficiency requires the supply voltage to be maintained at 3.3V. It consumes 10μA current.
NLV74LCX374DTR2G Features
Tape & Reel (TR) package
Automotive, AEC-Q100 series
20 pins
NLV74LCX374DTR2G Applications
There are a lot of ON Semiconductor NLV74LCX374DTR2G Flip Flops applications.
- Instrumentation
- ESD protection
- High Performance Logic for test systems
- Parallel data storage
- Computers
- Control circuits
- Matched Rise and Fall
- Event Detectors
- Functionally equivalent to the MC10/100EL29
- Clock pulse
