NLV74LCX573DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74LCX573DTR2G Overview
Package 20-TSSOP (0.173, 4.40mm Width) includes it. Tape & Reel (TR) is the packaging method. The output it is configured with uses Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 2V~3.6V. A temperature of -55°C~125°C is set as the operating temperature. Automotive, AEC-Q100 is the series number of this FPGA. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. A 2.5V voltage supply is required for operation. With 20 pins, it is equipped. This electronic device belongs to the family of LVC/LCX/Z. The 20 pins are designed into it. The electronic part is mounted in a way that corresponds to Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to the subcategory of FF/Latches. 3.6V is the maximum supply voltage (Vsup). There are 3.3V power supplies required for this machine to operate. The supply voltage (Vsup) should be greater than 2V. The reliability of this device makes it well suited to TAPE AND REEL.
NLV74LCX573DTR2G Features
20-TSSOP (0.173, 4.40mm Width) package
Automotive, AEC-Q100 series
8 Bits
20 pin count
20 pins
3.3V power supplies
NLV74LCX573DTR2G Applications
There are a lot of ON Semiconductor NLV74LCX573DTR2G Latches applications.
- Address register
- Avionics
- Relay replacement
- High-speed logic
- Counter control
- Motor Drives
- A/D converters
- Decade counting
- Counter
- Frequency
