Parameters |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
Resistance |
100Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
450mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Number of Functions |
4 |
Terminal Pitch |
0.635mm |
Base Part Number |
NLVHC4066A |
Pin Count |
14 |
Operating Supply Voltage |
9V |
Polarity |
Non-Inverting |
Max Supply Voltage |
12V |
Min Supply Voltage |
2V |
Operating Supply Current |
40μA |
Power Dissipation |
450mW |
Turn On Delay Time |
80 ns |
Logic Function |
Demultiplexer, Multiplexer |
Number of Inputs |
4 |
Halogen Free |
Halogen Free |
Supply Type |
Dual, Single |
Turn-Off Delay Time |
80 ns |
-3db Bandwidth |
160MHz |
On-State Resistance (Max) |
70Ohm |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
Switch Circuit |
SPST - NO |
Channel-to-Channel Matching (ΔRon) |
15 Ω |
Crosstalk |
-80dB @ 1MHz |
Switching |
MAKE-BEFORE-BREAK |
Voltage - Supply, Single (V+) |
2V~12V |
Normal Position |
NO |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
NLVHC4066ADTR2G Overview
Due to its 14-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Extended operating temperature around -55°C~125°C TA. Total terminations are 14. It is injected into the electrical part body with 14 pins. The analog switch ics are built using SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with NLVHC4066A. This digital multiplexer has 100Ohm internal resistance. The functions of 14 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 12V in normal situations. An effective Dual, Single supply digital multiplexer. There should be 2V voltage fed to the electrical part below 2V. It would be sufficient to run this analogue multiplexer with 40μA current. A voltage of 2V~12V is required to drain this analog switch from a single voltage supply. 9V operating voltages can be used with this electrical part. The 4 inputs need to be operated in order to work. Automotive, AEC-Q100 is a series number.
NLVHC4066ADTR2G Features
Switch Circuit: SPST - NO
40μA Supply Current
-3db Bandwidth: 160MHz
NLVHC4066ADTR2G Applications
There are a lot of ON Semiconductor NLVHC4066ADTR2G Analog Switches & Multiplexers ICs applications.
- T1/E1 Terminals
- Signal routing between systems
- ATM
- CSU
- Avionics and Military Systems
- Optical Applications
- Relay Replacement
- Routers
- Cable Modem
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8