NLVHC4851ADR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 600Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | NLVHC4851A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6V |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 20μA |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 260 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| Turn-Off Delay Time | 260 ns |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 40pF |
| On-state Resistance Match-Nom | 160Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 300ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.025A |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NLVHC4851ADR2 Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operation at a temperature around -55°C~125°C TA. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 8 channels. With a 3V voltage supply, the electrical component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. This multiplexer is composed of 1 circuits. Try searching with NLVHC4851A to find analog multiplexer variants. An switch multiplexer with 600Ohm internal resistance has a value of 600Ohm. To find out what the 16 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Analog switch ics with Single supply type are cost-effective. The analogue multiplexer could operate on 20μA current. Analogue multiplexers require a 2V~6V voltage to drain from a single voltage supply. Operating voltages range from 6V. The Automotive, AEC-Q100 series includes it.
NLVHC4851ADR2 Features
8 Channels
20μA Supply Current
NLVHC4851ADR2 Applications
There are a lot of ON Semiconductor NLVHC4851ADR2 Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Battery Powered Instruments
- PDAs
- DVD-R
- Frame Relay Equipment
- Precision data acquisition
- Sample hold systems
- Digital cross connects (DSX-1)
- Microprocessor Controlled Analog Systems
- PBX interfaces
