NLVHC4852ADTR2G
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MC74HC4852A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 450mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.04mA |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 40pF |
| On-state Resistance Match-Nom | 160Ohm |
| Switch Circuit | SP4T |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 300ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
NLVHC4852ADTR2G Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -55°C~125°C TA. Total terminations are 16. A electrical component with 4 channels is capable of high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. On the other hand, analog switches can be constructed using SP4T switching circuits. The circuits in this analogue multiplexer number 2. MC74HC4852A can be used to search for analog multiplexer variants. Datasheets for 16 pin functions are available upon request. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. A cost-effective Single supply type analogue multiplexer. 2V is the lowest voltage the electrical component should receive. Analogue multiplexers require a 2V~6V voltage to drain from a single voltage supply. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. In order to operate the 8 inputs, there are several steps to follow. This is electronic component of the Automotive, AEC-Q100 series.
NLVHC4852ADTR2G Features
4 Channels
Switch Circuit: SP4T
NLVHC4852ADTR2G Applications
There are a lot of ON Semiconductor NLVHC4852ADTR2G Analog Switches & Multiplexers ICs applications.
- Industrial and process control systems
- Audio signal routing
- Audio/video switches
- Communication systems
- Video signal routing
- Precision instrumentation
- T1/E1 Terminals
- PDH Multiplexers
- DSUs
- DVD-R
