Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
400Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Pin Count |
16 |
Power Supplies |
5V |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Halogen Free |
Halogen Free |
Supply Current-Max (Isup) |
0.04mA |
On-State Resistance (Max) |
400Ohm |
Multiplexer/Demultiplexer Circuit |
8:1 |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
40pF |
On-state Resistance Match-Nom |
80Ohm |
Switch-on Time-Max |
40ns |
Switch-off Time-Max |
40ns |
Voltage - Supply, Single (V+) |
4.5V~5.5V |
Signal Current-Max |
0.025A |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NLVHCT4851ADTR2G Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operation at a temperature around -55°C~125°C TA. In total, 16 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. As part of its design, the 16 series is equipped with this electronic component. There are 1 circuits in this multiplexer. There is 400Ohm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 5.5V should not normally be supplied to the switches. The lowest voltage fed to the electronic component should be 4.5V. Analogue multiplexers require a 4.5V~5.5V voltage to drain from a single voltage supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. This is one of the Automotive, AEC-Q100 series.
NLVHCT4851ADTR2G Features
1 Channels
NLVHCT4851ADTR2G Applications
There are a lot of ON Semiconductor NLVHCT4851ADTR2G Analog Switches & Multiplexers ICs applications.
- Routers
- High-Voltage
- DVD-R
- Public switching systems
- CSU
- PDAs
- Central office
- Medical systems
- RGB switches
- Battery Powered Instruments