NS486SXF-25/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | 160-BFQFP |
| Number of Pins | 160 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 25MHz |
| Base Part Number | NS486 |
| Pin Count | 160 |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 29 |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | Intel486 SX |
| Bit Size | 32 |
| Has ADC | NO |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | NO |
| DAC Channels | NO |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V 5.0V |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| Additional Interfaces | Access.bus, IrDA, Microwire, PCMCIA, UART |
| Number of Serial I/Os | 1 |
| Number of Timers | 3 |
| Number of Cores | 1 |
| Number of External Interrupts | 13 |
| Display & Interface Controllers | LCD |
| Number of DMA Channels | 6 |
| Height | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Thickness | 3.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
NS486SXF-25/NOPB Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 160-BFQFP. Advanced packaging method Tray is used to provide high reliability. In the CPU, there are 1 Core 32-Bit cores and 1 Core 32-Bit bus width. Understand the operating temperature around 0°C~70°C TA. The CPU is powered by a Intel486 SX core. Memory controllers for this CPU are DRAM. This microprocessor features interfaces Access.bus, IrDA, Microwire, PCMCIA, UART. I/O is run at 3.3V 5.0V on this CPU. The type MICROCONTROLLER belongs to uPs/uCs/Peripheral ICs. Try searching for variants of the cpu microprocessor with NS486. As a whole, there are 160 terminations. With a 5V voltage supply, the part should be turned on and run. This microprocessor has an architecture of 32 bits. There is 25MHz frequency set for the CPU. Detailed functions for 160 pins can be found in the datasheets. To transfer data, there is a bandwidth of 32b. Embedded microprocessor bodies have 160 pins injected into them. This is a 1-core CPU. Many applications use this CPU with Surface Mount mounted. As of 5V, the CPU microprocessor is capable of functioning. In a normal situation, users should not supply the CPU microprocessor with a voltage higher than 5.25V. It is recommended that the lowest voltage be fed to the micro processor is 4.75V. Programs on the CPU transfer data through 29 I/Os. For hardware interrupts, there are 13 external interrupt terminations. 1 serial I/Os are set to communicate datas between peripherals. 6 channels are applied to program the DMA (Direct Memory Access) process.
NS486SXF-25/NOPB Features
Intel486 SX Core
32-Bit Structure
32b-Bit Data Bus Width
1-Core CPU
29 I/Os
NS486SXF-25/NOPB Applications
There are a lot of Texas Instruments NS486SXF-25/NOPB Microprocessor applications.
- Robotic prosthetic limbs
- PDAs, game consoles
- Gas monitoring systems
- Smart highways (navigation, traffic control, information monitoring and car service)
- Dishwashers
- Removable disks
- Binding machines
- Microwave ovens
- Electromechanical control
- Day to day life field
