NS5A4684SMNTAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFQFN |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Resistance | 400mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 2 |
| Terminal Pitch | 0.4mm |
| Output | SEPARATE OUTPUT |
| Pin Count | 10 |
| Power Supplies | 1.8/5V |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Max Supply Current | 1μA |
| Turn On Delay Time | 50 ns |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 30 ns |
| -3db Bandwidth | 19MHz |
| On-State Resistance (Max) | 400mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 60pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 50ns, 30ns |
| Charge Injection | 38pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω (Max) |
| Crosstalk | -70dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NS5A4684SMNTAG Overview
Packed in 10-WFQFN, the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature extended to -40°C~85°C TA. The total number of terminations is 10. It is injected into the electrical part body with 10 pins. These analog multiplexers are built based on SPDT switching circuits. The multiplexer consists of 2 circuits. Internally, this switch multiplexer has a resistance of 400mOhm. The datasheets for the 10 pins explain the functions. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 5.5V to a switch device. A analog switch ic that has a cost-effective Single supply type. 1.65V is the lowest voltage that should be fed to the electronic electronic part. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. A digital multiplexer may suffer damage if voltage is applied above 1μA. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.
NS5A4684SMNTAG Features
Switch Circuit: SPDT
-3db Bandwidth: 19MHz
NS5A4684SMNTAG Applications
There are a lot of ON Semiconductor NS5A4684SMNTAG Analog Switches & Multiplexers ICs applications.
- E1 Network Equipment
- Avionics
- Avionics test equipment
- Video signal routing
- Sample-and-hold systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Relay Replacement
- Cellular phones
- 65 V DACs
- Precision test equipment
