NS5A4684SMNTBG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFQFN |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Resistance | 600mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NS5A4684 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 4.5V |
| Power Supplies | 1.8/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 2μA |
| Turn On Delay Time | 60 ns |
| Number of Inputs | 2 |
| Halogen Free | Halogen Free |
| Turn-Off Delay Time | 40 ns |
| -3db Bandwidth | 19MHz |
| On-State Resistance (Max) | 400mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 60pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 50ns, 30ns |
| Charge Injection | 38pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω (Max) |
| Crosstalk | -70dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 750μm |
| Length | 1.8mm |
| Width | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NS5A4684SMNTBG Overview
The electronic part can be shipped overseas conveniently because it is packaged in 10-WFQFN. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature extended to -40°C~85°C TA. Total terminations are 10. An electrical component like this is included in the 10 series. A SPDT switching circuit is used for these analog switches. NS5A4684 can be used to search for analog multiplexer variants. Analog switches have 600mOhm internal resistance. For details about the functions of 10 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. 1.65V is the lowest voltage the electrical component should receive. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. A voltage of 4.5V can be used to operate the electronic component. A 2 input needs to be operated. A analog switch ics with 4 outputs is included.
NS5A4684SMNTBG Features
Switch Circuit: SPDT
-3db Bandwidth: 19MHz
NS5A4684SMNTBG Applications
There are a lot of ON Semiconductor NS5A4684SMNTBG Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Multiplexers
- Routers
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Cable PC
- FTTH
- Microprocessor controlled systems
- Public switching systems
- Data switching
- Cellular phones
