NS5B1G384DFT2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 15Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | NS5B1G384 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 100nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 6 ns |
| Number of Inputs | 1 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 2 ns |
| -3db Bandwidth | 330MHz |
| On-State Resistance (Max) | 15Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 4.1pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 6ns, 2ns |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NC |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NS5B1G384DFT2G Overview
Shipping overseas is convenient due to the electrical component's packing in 5-TSSOP, SC-70-5, SOT-353. High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. The total number of terminations is 5. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 4.5V, it should be turned on and run. There are 5 pins injected into the electronic part body. The analog switch ics are built using SPST - NC switching circuits. Try searching for NS5B1G384 variants of the analog switch ic. The internal resistance of this digital multiplexer is 15Ohm. The datasheets for the 5 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. Multiplexers should not be powered above 5.5V in normal situations. A analog switch ic that has a cost-effective Single supply type. 2V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 100nA. An analogue multiplexer drains from a single voltage supply at 2V~5.5V. The electrical component supports 1 inputs.
NS5B1G384DFT2G Features
1 Channels
Switch Circuit: SPST - NC
100nA Supply Current
-3db Bandwidth: 330MHz
NS5B1G384DFT2G Applications
There are a lot of ON Semiconductor NS5B1G384DFT2G Analog Switches & Multiplexers ICs applications.
- Avionics
- Remote Powered Equipment
- Battery Powered Systems
- DSLAMs
- Data Acquisition Systems
- Relay replacements
- Industrial
- Digital Cross-Connects
- Power routing
- Sample hold systems
