NS5B1G384DTT1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 15Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | NS5B1G384 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 100nA |
| Nominal Supply Current | 100nA |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 6 ns |
| Number of Inputs | 1 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 2 ns |
| -3db Bandwidth | 330MHz |
| On-State Resistance (Max) | 15Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Channel Capacitance (CS(off), CD(off)) | 4.1pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 6ns, 2ns |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NC |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NS5B1G384DTT1G Overview
Due to its SC-74A, SOT-753 packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 5 terminations. The electronic part delivers high-quality output through its 1 channels. A 4.5V voltage supply should turn on and run the electronic component. Into the electrical component body are injected 5 pins. SPST - NC switching circuits are used in these analog switch ics. There are 1 circuits in this switch device. Try searching for NS5B1G384 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 15Ohm. To find out what the functions of 5 pins are, please refer to their datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 2V. For this multiplexer to operate, 100nA current would be sufficient. Draining from a single voltage supply, this analog switch requires a voltage of 2V~5.5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. There are 1 inputs to be operated.
NS5B1G384DTT1G Features
1 Channels
Switch Circuit: SPST - NC
100nA Supply Current
-3db Bandwidth: 330MHz
NS5B1G384DTT1G Applications
There are a lot of ON Semiconductor NS5B1G384DTT1G Analog Switches & Multiplexers ICs applications.
- Isolation
- Imaging
- Cellular phones
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Precision instrumentation
- Medical
- PDH Multiplexers
- HDTV
- E1 Multiplexer
- Wireless Local Loop
