NS5B1G385DTT1G
| Parameters | |
|---|---|
| Switch Time (Ton, Toff) (Max) | 6ns, 2ns |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NO |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 7Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | NS5B1G385 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 100nA |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 6 ns |
| Number of Inputs | 1 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Turn-Off Delay Time | 2 ns |
| -3db Bandwidth | 330MHz |
| On-State Resistance (Max) | 15Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 4.1pF |
| Switch Circuit | SPST - NO |
NS5B1G385DTT1G Overview
The electrical component comes in SOT-23-5 Thin, TSOT-23-5 packaging, which makes it convenient to ship overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, you'll find this switch device. 1:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. There are 5 terminations totally. A 1 channel electronic part produces high-quality output. When the electronic component is given a voltage of 4.5V, it should be turned on and run. As part of the design of the 5 series, this electronic part has been incorporated into the system. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching for NS5B1G385 variants of the analog switch ic. As far as internal resistance is concerned, it has 7Ohm. To find out what the 5 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. A cost-effective Single supply type analogue multiplexer. There should be 2V voltage fed to the electrical part below 2V. For this digital switch to work, 100nA current would suffice. Draining from a single voltage supply, this analog switch requires a voltage of 2V~5.5V. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. The 1 inputs need to be operated in order to work.
NS5B1G385DTT1G Features
1 Channels
Switch Circuit: SPST - NO
100nA Supply Current
-3db Bandwidth: 330MHz
NS5B1G385DTT1G Applications
There are a lot of ON Semiconductor NS5B1G385DTT1G Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Public switching systems
- Central office
- Automatic test equipment
- Cross Connects
- Channel Banks
- Audio/video switches
- Cable PC
- Fiber to the Home
- Audio signal routing
