NTS0102GT,115
| Parameters | |
|---|---|
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Auto-Direction Sensing |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Other Interface ICs |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NTS0102 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-N8 |
| Qualification Status | Not Qualified |
| Output Type | Open Drain, Tri-State |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Circuits | 1 |
| Data Rate | 50Mbps |
| Differential Output | NO |
| Input Characteristics | STANDARD |
| Interface IC Type | LINE TRANSCEIVER |
| Driver Number of Bits | 2 |
| Channel Type | Bidirectional |
| Receiver Number of Bits | 2 |
| Interface Standard | GENERAL PURPOSE |
| Receive Delay-Max | 8.8 ns |
| Transmit Delay-Max | 8.8 ns |
| Supply Voltage1-Nom | 2.5V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.65V~3.6V |
| Voltage - VCCB | 2.3V~5.5V |
| Channels per Circuit | 2 |
| Supply Voltage1-Max | 5.5V |
| Height Seated (Max) | 0.5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Digi-Reel® |
NTS0102GT,115 Overview
In the 8-XFDFN package, it is embedded.Digi-Reel? is the packaging method.In its configuration, Open Drain, Tri-State is used as the output.Translator type Voltage Level is assigned to this electrical device.Surface Mount is used to mount this electronic part.Bidirectional is the type of channel for this electrical device.Operation is performed at -40°C~125°C TA.Due to its superior flexibility, it uses 1 circuits.0 terminations are used to end transmission lines.A series of related parts can be derived from the base part number NTS0102.In order for it to operate, it needs to be powered by a voltage of 1.8V.There are 8 pins on it.In the VCCA, the supply rail is set to 1.65V~3.6V.VCCB is configured with a supply rail that starts at 2.3V~5.5V.In Other Interface ICs, you will find this part.As long as Auto-Direction Sensing is ensured, operations will succeed.
NTS0102GT,115 Features
8-XFDFN package
1 circuits
8 pin count
NTS0102GT,115 Applications
There are a lot of NXP USA Inc. NTS0102GT,115 voltage translators & level shifters applications.
- Industrial
- Test Site
- Driving Indicator LEDs or Buzzers
- Handset
- Eliminate Slow or Noisy Input Signals
- Controlled Baseline
- LCD Panels Using GIP / GOA / ASG Technology
- Temperature Ranges (1)
- ADAS Fusion
- Power-sensitive applications
