Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 4 hours ago) |
Contact Plating | Tin |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | TO-236-3, SC-59, SOT-23-3 |
Number of Pins | 3 |
Transistor Element Material | SILICON |
Operating Temperature | -40°C~85°C TA |
Packaging | Tape & Reel (TR) |
Published | 2006 |
JESD-609 Code | e3 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 3 |
ECCN Code | EAR99 |
Resistance | 1.2Ohm |
Additional Feature | LOGIC LEVEL COMPATIBLE |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Current Rating | 500mA |
Time@Peak Reflow Temperature-Max (s) | 40 |
Base Part Number | NUD3105 |
Pin Count | 3 |
Number of Outputs | 1 |
Output Voltage | 6V |
Output Type | N-Channel |
Max Output Current | 300mA |
Operating Supply Voltage | 5V |
Number of Elements | 1 |
Interface | On/Off |
Element Configuration | Single |
Output Configuration | Low Side |
Operating Mode | ENHANCEMENT MODE |
Power Dissipation | 225mW |
Output Current | 400mA |
Voltage - Supply (Vcc/Vdd) | Not Required |
Switch Type | Relay, Solenoid Driver |
Transistor Application | SWITCHING |
Halogen Free | Halogen Free |
Rise Time | 30ns |
Drain to Source Voltage (Vdss) | 6V |
Fall Time (Typ) | 30 ns |
Continuous Drain Current (ID) | 500mA |
Ratio - Input:Output | 1:1 |
Gate to Source Voltage (Vgs) | 6V |
Voltage - Load | 6V Max |
Drain Current-Max (Abs) (ID) | 0.5A |
Drain to Source Breakdown Voltage | 6V |
FET Technology | METAL-OXIDE SEMICONDUCTOR |
Rds On (Typ) | 900m Ω (Max) |
Drain to Source Resistance | 900mOhm |
Height | 1.016mm |
Length | 3.0226mm |
Width | 1.397mm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
NUD3105LT1G Description
The NUD3105LT1G PMIC from ON Semiconductor is used to switch inductive loads such as relays, solenoids, incandescent bulbs, and small DC motors without the usage of a freewheeling diode.
NUD3105LT1G Features
Provides a Robust Driver Interface between DC Relay Coil and Sensitive Logic Circuits
Optimized to Switch Relays from 3.0 V to 5.0 V Rail
Capable of Driving Relay Coils Rated up to 2.5 W at 5.0 V
Internal Zener Eliminates the Need for Free-Wheeling Diode
Internal Zener Clamp Routes Induced Current to Ground for Quieter Systems Operation
NUD3105LT1G Applications
Telecom
Computers and Office
Consumer
Automotive