banner_page

NUD3112DMT1G

N-Channel 0.95mm Tin PMIC NUD3112 6 Pin 12V SC-74, SOT-457


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NUD3112DMT1G
  • Package: SC-74, SOT-457
  • Datasheet: PDF
  • Stock: 907
  • Description: N-Channel 0.95mm Tin PMIC NUD3112 6 Pin 12V SC-74, SOT-457 (Kg)

Details

Tags

Parameters
Voltage - Load 14V Max
Driver Number of Bits 1
Drain to Source Breakdown Voltage 14V
Rds On (Typ) 900m Ω (Max)
Max Junction Temperature (Tj) 150°C
Drain to Source Resistance 900mOhm
Built-in Protections TRANSIENT
Ambient Temperature Range High 85°C
On-State Resistance 900mOhm
Height 1.1mm
Length 3mm
Width 1.5mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74, SOT-457
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2005
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Resistance 1.2Ohm
Subcategory Peripheral Drivers
Max Power Dissipation 380mW
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 12V
Terminal Pitch 0.95mm
Current Rating 500mA
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number NUD3112
Pin Count 6
Output Voltage 14V
Output Type N-Channel
Max Output Current 300mA
Operating Supply Voltage 14V
Number of Elements 2
Interface On/Off
Element Configuration Dual
Output Configuration Low Side
Power Dissipation 380mW
Output Current 400mA
Voltage - Supply (Vcc/Vdd) Not Required
Switch Type General Purpose
Halogen Free Halogen Free
Rise Time 61ns
Drain to Source Voltage (Vdss) 14V
Fall Time (Typ) 61 ns
Continuous Drain Current (ID) 500mA
Ratio - Input:Output 1:1
Gate to Source Voltage (Vgs) 6V

NUD3112DMT1G Overview


It is packaged in the form of a Tape & Reel (TR).There is a SC-74, SOT-457 package that includes it.The lighting driver is mounted in the Surface Mount position.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driving board operates at Not Required volts.The maximum output voltage of this LED driver is N-Channel volts.As you can see, it comes from the NUD3112 family.As a result, there are 6 terminations.It is necessary to use the 6 pins in order to operate the LED driver.It contains 2 functions.The maximum output current is reduced to 300mA to meet the operation criteria.A supply voltage of 12V leads to high efficiency.This lighting driver is mounted in the way of Surface Mount.6 pins are equipped with it.Currently, the LED driving board has 1.2Ohm resistance.This case has the output current set to 400mA.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In order to maximize efficiency, the supply voltage should be set at 14V.The total number of elements is 2.

NUD3112DMT1G Features


Supplied from 12V
Resistance of 1.2Ohm

NUD3112DMT1G Applications


There are a lot of ON Semiconductor NUD3112DMT1G Power Switches ICs applications.

  • Wearable Devices
  • USB Ports/Hubs
  • Portable Devices
  • Portable GPS Device
  • Hot-Swap Systems
  • Wireless Headsets
  • PC Cards
  • Storage Drives
  • PDAs
  • Solid State Drivers

Write a review

Note: HTML is not translated!
    Bad           Good