NUD3112LT1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Surface Mount | YES |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.95mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NUD3112 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 300mA |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Power Dissipation | 225mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Rise Time | 61ns |
| Drain to Source Voltage (Vdss) | 14V |
| Fall Time (Typ) | 61 ns |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 6V |
| Voltage - Load | 14V Max |
| Driver Number of Bits | 1 |
| Drain to Source Breakdown Voltage | 14V |
| Rds On (Typ) | 900m Ω (Max) |
| Drain to Source Resistance | 900mOhm |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NUD3112LT1 Overview
Tape & Reel (TR) is the way it's packaged.The TO-236-3, SC-59, SOT-23-3 package contains it.The LED driver is mounted as Surface Mount.The switch type of this switch is General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.Operation is based on Not Required supply voltage.It produces a maximum output voltage of N-Channel volts at its maximum output.It is a member of the NUD3112 family.It contains 3 terminations.It is necessary to use the 3 pins in order to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.Maximum output current falls to 300mA when operation criteria are met.With a supply voltage of 12V, high efficiency is possible.This LED driver is equipped with a total of 3 pins.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.
NUD3112LT1 Features
Supplied from 12V
NUD3112LT1 Applications
There are a lot of ON Semiconductor NUD3112LT1 Power Switches ICs applications.
- Hot Swaps
- Portable Music Players
- Wireless/Networking Cards
- Wireless Headsets
- Portable/Handheld Devices
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- Mobile Communication Devices
- USB3.1 Power Delivery
- Hot Swap
