NUD3124DMT1G
| Parameters | |
|---|---|
| Voltage - Load | 28V Max |
| Drain Current-Max (Abs) (ID) | 0.15A |
| Drain to Source Breakdown Voltage | 28V |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 800m Ω (Max) |
| Drain to Source Resistance | 800mOhm |
| Height | 940μm |
| Length | 3mm |
| Width | 1.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74, SOT-457 |
| Number of Pins | 6 |
| Transistor Element Material | SILICON |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2005 |
| Series | MicroIntegration™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 1.4Ohm |
| Terminal Finish | Tin (Sn) |
| Additional Feature | LOGIC LEVEL COMPATIBLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Current Rating | 150mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NUD3124 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Output Voltage | 28V |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Operating Supply Voltage | 12V |
| Number of Elements | 2 |
| Interface | On/Off |
| Element Configuration | Dual |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 380mW |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | Relay, Solenoid Driver |
| Transistor Application | SWITCHING |
| Halogen Free | Halogen Free |
| Rise Time | 708ns |
| Drain to Source Voltage (Vdss) | 28V |
| Fall Time (Typ) | 708 ns |
| Continuous Drain Current (ID) | 150mA |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 12V |
NUD3124DMT1G Overview
It is package in Cut Tape (CT) case.There is a package for it in the SC-74, SOT-457 package.Mounting type Surface Mount is selected for the LED driving board.There is a Relay, Solenoid Driver switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TA.There are 2 outputs available on this lighting driver.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.There is a NUD3124 family of things that it belongs to.A total of 6 terminations can be found in it.For operation, we use the 6 pins.As a result, the maximum output current is reduced to 150mA in order to meet the operation requirements.This lighting driver is mounted in the way of Surface Mount.As a result, it has a total of 6 pins.Lighting drivers with 1.4Ohm resistance are used.It is part of the MicroIntegration? series.The output current is set to 200mA in this case.It is recommended to set the supply voltage to 12V for optimum efficiency.Using this LED driver, it is also possible to produce LOGIC LEVEL COMPATIBLE.Total, there are 2 elements.SWITCHING transistors are used in the lighting driver.
NUD3124DMT1G Features
Resistance of 1.4Ohm
Additional features like LOGIC LEVEL COMPATIBLE
Transistor applications such as SWITCHING
NUD3124DMT1G Applications
There are a lot of ON Semiconductor NUD3124DMT1G Power Switches ICs applications.
- Set-top-box
- Portable/Handheld Devices
- Portable Music Players
- Portable Video Game Players
- Wireless Modem Data Cards
- Storage (HDDs, SSDs)
- Hot-Swap Systems
- Storage Drives
- Portable GPS Device
- Telecom and Network Systems
