NUD3124LT1G
| Parameters | |
|---|---|
| Width | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Transistor Element Material | SILICON |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2004 |
| Series | MicroIntegration™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 1.4Ohm |
| Additional Feature | LOGIC LEVEL COMPATIBLE |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Current Rating | 200mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NUD3124 |
| Pin Count | 3 |
| Output Voltage | 28V |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Power Dissipation | 225mW |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | Relay, Solenoid Driver |
| Transistor Application | SWITCHING |
| Halogen Free | Halogen Free |
| Rise Time | 708ns |
| Drain to Source Voltage (Vdss) | 28V |
| Fall Time (Typ) | 708 ns |
| Continuous Drain Current (ID) | 150mA |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 12V |
| Voltage - Load | 28V Max |
| Drain to Source Breakdown Voltage | 28V |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 800m Ω (Max) |
| Drain to Source Resistance | 800mOhm |
| Height | 1.01mm |
| Length | 3.04mm |
NUD3124LT1G Overview
Cut Tape (CT) is how it's packaged.There is a package for it in the TO-236-3, SC-59, SOT-23-3 package.The lighting driver is mounted in the Surface Mount position.The switch type of this switch is Relay, Solenoid Driver.To ensure reliable operation, set the temperature to -40°C~125°C TA.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of N-Channel volts.As you can see, it comes from the NUD3124 family.It contains 3 terminations.The operation is performed through the 3 pins.This operation requires the maximum output current to be decreased to 150mA.Surface Mount is mounted in the way of this LED driving board.It is equipped with a total of 3 pins.In this case, there is 1.4Ohm resistance in the LED driving board.The MicroIntegration? series includes this electrical component.In this case, the output current will be set to 200mA.As a result of using this lighting driver, LOGIC LEVEL COMPATIBLE can also be produced.There are a total of 1 elements.As far as transistor application is concerned, the LED driver has SWITCHING.
NUD3124LT1G Features
Resistance of 1.4Ohm
Additional features like LOGIC LEVEL COMPATIBLE
Transistor applications such as SWITCHING
NUD3124LT1G Applications
There are a lot of ON Semiconductor NUD3124LT1G Power Switches ICs applications.
- USB Power Distribution
- Wireless Headsets
- Notebook and Tablet Computers
- Low Voltage I/O System Power
- USB Protection
- Telecom and Network Systems
- HDD, SSD
- Set-Top Boxes
- Notebook PC
- Portable/Handheld Devices
