NUD3160DMT1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74, SOT-457 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | MicroIntegration™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 3.7Ohm |
| Subcategory | Peripheral Drivers |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Terminal Pitch | 0.95mm |
| Current Rating | 263mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NUD3160 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Output Voltage | 61V |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Interface | On/Off |
| Element Configuration | Dual |
| Output Configuration | Low Side |
| Power Dissipation | 380mW |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | Relay, Solenoid Driver |
| Halogen Free | Halogen Free |
| Rise Time | 600ns |
| Drain to Source Voltage (Vdss) | 60V |
| Fall Time (Typ) | 600 ns |
| Continuous Drain Current (ID) | 150mA |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 12V |
| Voltage - Load | 61V Max |
| Driver Number of Bits | 2 |
| Drain to Source Breakdown Voltage | 60V |
| Rds On (Typ) | 1.8 Ω (Max) |
| Drain to Source Resistance | 1.8Ohm |
| Built-in Protections | TRANSIENT |
| Height | 940μm |
| Length | 3mm |
| Width | 1.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NUD3160DMT1G Overview
A Tape & Reel (TR) is used to package it.There is a SC-74, SOT-457 package that includes it.Surface Mount is the mounting type of the LED driver.Relay, Solenoid Driver is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~125°C TA.There are 2 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.The NUD3160 family consists of this type.The termination count is 6.The operation is performed through the 6 pins.Currently, the lighting driver has a total of 2 functions.As a result, the maximum output current is reduced to 150mA in order to meet the operation requirements.The lighting driver is mounted in the direction of Surface Mount.There are 6 pins in total on this board.The LED driver has 3.7Ohm resistance.This electrical component is included in the MicroIntegration? series.It is set to 200mA in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.
NUD3160DMT1G Features
Resistance of 3.7Ohm
NUD3160DMT1G Applications
There are a lot of ON Semiconductor NUD3160DMT1G Power Switches ICs applications.
- Low Voltage I/O System Power
- USB Power Distribution
- Portable/Handheld Devices
- Hot Swap
- Mobile Communication Devices
- Wearable Devices
- Storage (HDDs, SSDs)
- Smartphone and PDA
- Hot Swaps
- USB Protection
