NUD3160LT1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Surface Mount | YES |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | MicroIntegration™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NUD3160 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Power Dissipation | 225mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | Relay, Solenoid Driver |
| Rise Time | 600ns |
| Drain to Source Voltage (Vdss) | 60V |
| Fall Time (Typ) | 600 ns |
| Continuous Drain Current (ID) | 150mA |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 12V |
| Voltage - Load | 61V Max |
| Driver Number of Bits | 1 |
| Drain to Source Breakdown Voltage | 60V |
| Rds On (Typ) | 1.8 Ω (Max) |
| Drain to Source Resistance | 1.8Ohm |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Length | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NUD3160LT1 Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the TO-236-3, SC-59, SOT-23-3 package.It has been mounted as Surface Mount on the LED driver.Relay, Solenoid Driver is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~125°C TA.The lighting driver has a total of 1 outputs that are available for use.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts has been specified.It belongs to the NUD3160 family.There are 3 terminations in it.The 3 pins are used for the operation of the system.It consists of 1 functions.The maximum output current must drop to 150mA to meet the operation criteria.In total, it has 3 pins.This electrical component is part of the MicroIntegration? series.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.
NUD3160LT1 Features
NUD3160LT1 Applications
There are a lot of ON Semiconductor NUD3160LT1 Power Switches ICs applications.
- USB3.1 Power Delivery
- Portable GPS
- Hot Swap
- Storage Drives
- Gaming
- Set-Top Boxes
- Hot Swap
- Hot Swaps
- Wearable Devices
- Portable GPS Device
