Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-236-3, SC-59, SOT-23-3 |
Number of Pins |
3 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
Series |
MicroIntegration™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Resistance |
2.4Ohm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
225mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.95mm |
Current Rating |
200mA |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NUD3160 |
Pin Count |
3 |
Output Voltage |
61V |
Output Type |
N-Channel |
Max Output Current |
150mA |
Number of Elements |
1 |
Interface |
On/Off |
Element Configuration |
Single |
Output Configuration |
Low Side |
Power Dissipation |
225mW |
Output Current |
200mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Propagation Delay |
1.16 μs |
Switch Type |
Relay, Solenoid Driver |
Halogen Free |
Halogen Free |
Rise Time |
600ns |
Drain to Source Voltage (Vdss) |
60V |
Fall Time (Typ) |
622 ns |
Continuous Drain Current (ID) |
150mA |
Ratio - Input:Output |
1:1 |
Gate to Source Voltage (Vgs) |
12V |
Voltage - Load |
61V Max |
Driver Number of Bits |
1 |
Drain to Source Breakdown Voltage |
60V |
Rds On (Typ) |
1.8 Ω (Max) |
Max Junction Temperature (Tj) |
150°C |
Drain to Source Resistance |
1.8Ohm |
Built-in Protections |
TRANSIENT |
Ambient Temperature Range High |
125°C |
Height |
1.11mm |
Length |
3.04mm |
Width |
1.4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NUD3160LT1G Overview
The LED driver's packaged as a Tape & Reel (TR).It is included in the package TO-236-3, SC-59, SOT-23-3.The lighting driver has the mounting type Surface Mount.There is a Relay, Solenoid Driver switch type associated with it.It is recommended that the temperature be set to -40°C~125°C TA for reliable performance.A voltage of Not Required is used to power it.It produces a maximum output voltage of N-Channel volts at its maximum output.It comes under the family of NUD3160.A total of 3 terminations have been recorded.For operation, 3 pins are used.The LED driver has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 150mA.It is positioned in the direction of Surface Mount.A total of 3 pins are present on it.In this LED driving board, there is 2.4Ohm resistance.There is an electrical component included in the MicroIntegration? series.This case results in a 200mA output current.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.A total of 1 elements are present.
NUD3160LT1G Features
Resistance of 2.4Ohm
NUD3160LT1G Applications
There are a lot of ON Semiconductor NUD3160LT1G Power Switches ICs applications.
- PC Card Hot Swap
- PDAs
- HDD and SSD
- Low Voltage I/O System Power
- Portable GPS Device
- USB Power Distribution
- Hot Swap
- Solid-State Drives
- Gaming
- Storage (HDDs, SSDs)