NVT2003DP,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Feature | Auto-Direction Sensing |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Additional Feature | TOTEM OUTPUT CHARACTERISTIC ALSO POSSIBLE |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NVT2003 |
| Pin Count | 10 |
| Output Type | Open Drain, Push-Pull |
| Supply Voltage-Min (Vsup) | 1V |
| Number of Circuits | 1 |
| Number of Bits | 3 |
| Output Characteristics | OPEN-EMITTER |
| Output Polarity | TRUE |
| Interface IC Type | GTL TO TTL TRANSCEIVER |
| Channel Type | Bidirectional |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1V~3.6V |
| Voltage - VCCB | 1.8V~5.5V |
| Channels per Circuit | 3 |
| Supply Voltage1-Max | 5.5V |
| Output Latch or Register | NONE |
| RoHS Status | ROHS3 Compliant |
NVT2003DP,118 Overview
The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package contains it.Packaged as Tape & Reel (TR).Level translators uses Open Drain, Push-Pull as level translatorss output configuration.Voltage Level is the translator type of this electrical device.The electronic part is mounted using the Surface Mount method.The Channel type of this electrical device is Bidirectional.There is -40°C~85°C TA operating temperature.To achieve its exceptional flexibility, it relies on 1 circuits.To end a transmission line, there are 10 types of termination that can be used.Parts that are related to NVT2003 can be identified based on its base part number.There are 10 pins on this device.This electronic part is designed with 3 Bits.A VCCA supply rail is configured as 1V~3.6V.In the VCCB, the supply rail is set to 1.8V~5.5V.Level translators is possible to ensure Auto-Direction Sensing when operating.Also, TOTEM OUTPUT CHARACTERISTIC ALSO POSSIBLE characterize it.If the supply voltage (Vsup) is maintained above 1V, the system will work normally.
NVT2003DP,118 Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
1 circuits
10 pin count
NVT2003DP,118 Applications
There are a lot of NXP USA Inc. NVT2003DP,118 voltage translators & level shifters applications.
- Notebook
- Industrial
- SDIO
- One Fabrication Site
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- One Assembly and Test Site
- Personal Electronics
- Extended Product Life Cycle
- Test Site
- Eliminate slow or noisy input signals
