NX3L1G3157GW,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.65V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NX3L1G3157 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G6 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 4.3V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 750mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF |
| On-state Resistance Match-Nom | 0.2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 25ns, 10ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 20m Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 52ns |
| Switch-off Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
NX3L1G3157GW,125 Overview
Due to its 6-TSSOP, SC-88, SOT-363 packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Temperatures around -40°C~125°C TA are extended for operation. In total, there have been 6 terminations. This electronic part offers high-quality output due to its 1 channels. With a 1.65V voltage supply, the electrical component should be turned on and run. A key feature of the 6 series is the inclusion of this electronic part as part of its design. A SPDT switching circuit is used to build these analog multiplexers. Circuits number 1 make up this analogue multiplexer. Using the NX3L1G3157 search parameter, you can discover variants of the switch. It is a typical Multiplexer or Switches analog multiplexer. Using a single voltage supply, this switch device consumes 1.4V~4.3V volts.
NX3L1G3157GW,125 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 60MHz
NX3L1G3157GW,125 Applications
There are a lot of NXP USA Inc. NX3L1G3157GW,125 Analog Switches & Multiplexers ICs applications.
- Microprocessor Controlled Analog Systems
- Avionics
- Cross Connects
- Fiber In The Loop (FITL)
- MP3 players
- Microwave transmission systems
- Audio and video switching
- 65 V DACs
- Battery Powered Systems
- Isolation
