NX3L1T3157GM,115

40ns, 20ns SPDT 500mOhm DUAL Analog Switches BREAK-BEFORE-MAKE NX3L1T3157G 6 Pins 10nA 1.65V 6-XFDFN

Manufacturer: NXP USA Inc.
Nocochips NO: 568-NX3L1T3157GM,115
Package: 6-XFDFN
Datasheet: PDF
Stock: 401
Description: 40ns, 20ns SPDT 500mOhm DUAL Analog Switches BREAK-BEFORE-MAKE NX3L1T3157G 6 Pins 10nA 1.65V 6-XFDFN(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	6-XFDFN
Surface Mount	YES
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
Terminal Finish	Tin (Sn)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.65V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	NX3L1T3157G
Output	SEPARATE OUTPUT
Pin Count	6
JESD-30 Code	R-PDSO-N6
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	4.3V
Number of Channels	1
Number of Circuits	1
-3db Bandwidth	60MHz
On-State Resistance (Max)	500mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	35pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	40ns, 20ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	20m Ω
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	90ns
Voltage - Supply, Single (V+)	1.4V~4.3V
Height Seated (Max)	0.5mm
RoHS Status	ROHS3 Compliant

NX3L1T3157GM,115 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 6-XFDFN. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 6. The electronic part provides high-quality output because it has 1 channels. With a 1.65V voltage supply, the electrical component should be turned on and run. The electronic part body is injected with 6 pins. Based on SPDT switching circuits, these analog multiplexers work. Circuits number 1 make up this analogue multiplexer. Try searching for NX3L1T3157G variants of the analog switch ic. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage of 1.4V~4.3V is required for this switch device, which drains from a single voltage source. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.