NX3L1T53GT,115

40ns, 20ns SPDT 750mOhm DUAL Analog Switches BREAK-BEFORE-MAKE NX3L1T53G 8 Pins 10nA 1.65V 8-XFDFN

Manufacturer: NXP USA Inc.
Nocochips NO: 568-NX3L1T53GT,115
Package: 8-XFDFN
Datasheet: PDF
Stock: 774
Description: 40ns, 20ns SPDT 750mOhm DUAL Analog Switches BREAK-BEFORE-MAKE NX3L1T53G 8 Pins 10nA 1.65V 8-XFDFN(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	8-XFDFN
Surface Mount	YES
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Terminal Finish	NICKEL PALLADIUM GOLD
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.65V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	NX3L1T53G
Pin Count	8
JESD-30 Code	R-PDSO-N8
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	4.3V
Number of Channels	1
Number of Circuits	1
-3db Bandwidth	60MHz
On-State Resistance (Max)	750mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	35pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	40ns, 20ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	20m Ω
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	90ns
Voltage - Supply, Single (V+)	1.4V~4.3V
Height Seated (Max)	0.5mm
RoHS Status	ROHS3 Compliant

NX3L1T53GT,115 Overview

Packed in 8-XFDFN, the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. 2:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~125°C TA. In total, 8 terminations have occurred. The electronic part provides high-quality output because it has 1 channels. With a 1.65V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 8 series. On the other hand, analog switches can be constructed using SPDT switching circuits. The circuits in this analogue multiplexer number 1. Try searching with NX3L1T53G to find analog multiplexer variants. It is a typical Multiplexer or Switches analog multiplexer. A voltage of 1.4V~4.3V is required to drain this analog switch from a single voltage supply.