NX3L2267GU,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-XFQFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NX3L2267 |
| Output | SEPARATE OUTPUT |
| Pin Count | 10 |
| JESD-30 Code | R-PQCC-N10 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.4/4.3V |
| Number of Circuits | 2 |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 750mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 40ns, 20ns |
| Charge Injection | 37pC |
| Channel-to-Channel Matching (ΔRon) | 90m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| RoHS Status | ROHS3 Compliant |
NX3L2267GU,115 Overview
This electronic part is conveniently packaged in 10-XFQFN, making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Temperatures around -40°C~125°C TA are extended for operation. Totally, there are 10 terminations. An electrical component of this type can be found in the 10 series. Based on SPDT switching circuits, these analog multiplexers work. A 2 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with NX3L2267. In this analog multiplexer, the value is Multiplexer or Switches. This analog switch requires a voltage of 1.4V~4.3V to drain from a single voltage supply. This analog switch ic utilizes SEPARATE OUTPUT output.
NX3L2267GU,115 Features
Switch Circuit: SPDT
-3db Bandwidth: 60MHz
NX3L2267GU,115 Applications
There are a lot of NXP USA Inc. NX3L2267GU,115 Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- RGB switches
- Multi-Line E1 Interface Cards
- Low-Voltage
- Avionics test equipment
- Data Acquisition Systems
- Battery Powered Instruments
- SDH
- Microwave transmission systems
- Fiber In The Loop (FITL)
