NX3L2G66GM,125

23ns, 8ns SPST - NO 750mOhm QUAD Analog Switches BREAK-BEFORE-MAKE NX3L2G66G 8 Pins 10nA 1.65V 8-XFQFN Exposed Pad

Manufacturer: NXP USA Inc.
Nocochips NO: 568-NX3L2G66GM,125
Package: 8-XFQFN Exposed Pad
Datasheet: PDF
Stock: 609
Description: 23ns, 8ns SPST - NO 750mOhm QUAD Analog Switches BREAK-BEFORE-MAKE NX3L2G66G 8 Pins 10nA 1.65V 8-XFQFN Exposed Pad(Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	8-XFQFN Exposed Pad
Surface Mount	YES
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Terminal Finish	NICKEL PALLADIUM GOLD
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.65V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	NX3L2G66G
Output	SEPARATE OUTPUT
Pin Count	8
JESD-30 Code	S-PQCC-N8
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	4.3V
Power Supplies	1.5/3.3V
Number of Channels	1
Number of Circuits	2
-3db Bandwidth	60MHz
On-State Resistance (Max)	750mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	35pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	23ns, 8ns
Charge Injection	6pC
Channel-to-Channel Matching (ΔRon)	20m Ω
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	48ns
Voltage - Supply, Single (V+)	1.4V~4.3V
Normal Position	NO
Height Seated (Max)	0.5mm
Length	1.6mm
RoHS Status	ROHS3 Compliant

NX3L2G66GM,125 Overview

The electrical component comes in 8-XFQFN Exposed Pad packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 8. This electronic part offers high-quality output due to its 1 channels. A 1.65V voltage supply should turn on and run the electronic component. There is an electrical component included in the 8 series. A SPST - NO switching circuit is used for these analog switches. 2 circuits are used in this analogue multiplexer. Search with NX3L2G66G if you are looking for analog multiplexer variants. This switch device is a typical Multiplexer or Switches. A voltage of 1.4V~4.3V is required to drain this analog switch from a single voltage supply. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.