NX3L2G66GT,115

23ns, 8ns SPST - NO 750mOhm DUAL Analog Switches BREAK-BEFORE-MAKE NX3L2G66G 8 Pins 10nA 1.65V 8-XFDFN

Manufacturer: NXP USA Inc.
Nocochips NO: 568-NX3L2G66GT,115
Package: 8-XFDFN
Datasheet: PDF
Stock: 985
Description: 23ns, 8ns SPST - NO 750mOhm DUAL Analog Switches BREAK-BEFORE-MAKE NX3L2G66G 8 Pins 10nA 1.65V 8-XFDFN(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	8-XFDFN
Surface Mount	YES
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.65V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	NX3L2G66G
Output	SEPARATE OUTPUT
Pin Count	8
JESD-30 Code	R-PDSO-N8
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	4.3V
Power Supplies	1.5/3.3V
Number of Channels	1
Number of Circuits	2
-3db Bandwidth	60MHz
On-State Resistance (Max)	750mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	35pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	23ns, 8ns
Charge Injection	6pC
Channel-to-Channel Matching (ΔRon)	20m Ω
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	48ns
Voltage - Supply, Single (V+)	1.4V~4.3V
Normal Position	NO
Height Seated (Max)	0.5mm
Length	1.95mm
RoHS Status	ROHS3 Compliant

NX3L2G66GT,115 Overview

Packed in 8-XFDFN, the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. Total terminations are 8. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 1.65V voltage supply. It is injected into the electrical part body with 8 pins. A SPST - NO switching circuit is used for these analog switches. There are 2 circuits in this multiplexer. NX3L2G66G can be used to search for analog multiplexer variants. The analog multiplexer shown here is a typical Multiplexer or Switches. This analog switch requires a voltage of 1.4V~4.3V to drain from a single voltage supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer.