NX3L2T66GT,115

28ns, 20ns SPST - NO 750mOhm DUAL Analog Switches NX3L2T66G 8 Pins 10nA 1.65V 8-XFDFN

Manufacturer: NXP USA Inc.
Nocochips NO: 568-NX3L2T66GT,115
Package: 8-XFDFN
Datasheet: PDF
Stock: 527
Description: 28ns, 20ns SPST - NO 750mOhm DUAL Analog Switches NX3L2T66G 8 Pins 10nA 1.65V 8-XFDFN(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	8-XFDFN
Surface Mount	YES
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	2
Supply Voltage	1.65V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	NX3L2T66G
Pin Count	8
JESD-30 Code	R-PDSO-N8
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	4.3V
Power Supplies	1.5/3.3V
Number of Channels	1
Number of Circuits	2
-3db Bandwidth	60MHz
On-State Resistance (Max)	750mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	35pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	28ns, 20ns
Charge Injection	6pC
Channel-to-Channel Matching (ΔRon)	20m Ω
Crosstalk	-90dB @ 100kHz
Switch-on Time-Max	57ns
Switch-off Time-Max	90ns
Voltage - Supply, Single (V+)	1.4V~4.3V
Normal Position	NO
Height Seated (Max)	0.5mm
Length	1.95mm
RoHS Status	ROHS3 Compliant

NX3L2T66GT,115 Overview

The electrical component comes in 8-XFDFN packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 1:1. Operational temperature extended around -40°C~125°C TA. The total number of terminations is 8. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 1.65V volts, the electrical component should be turned on and run. 8 pins are injected to the electronic part body. A SPST - NO switching circuit is used to build these analog multiplexers. A total of 2 circuits make up this switch device. NX3L2T66G can be used to search for analog multiplexer variants. The analogue multiplexer in this example is a typical Multiplexer or Switches. Using a single voltage supply, this switch device consumes 1.4V~4.3V volts.