NX3L4053PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 3 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NX3L4053 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Number of Circuits | 3 |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 800mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 40ns, 20ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 120m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| RoHS Status | ROHS3 Compliant |
NX3L4053PW,118 Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 2:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~125°C TA. The total number of terminations is 16. Into the electrical component body are injected 16 pins. The analog switch ics are built using SPDT switching circuits. It consists of 3 circuits. Try searching with NX3L4053 to find analog multiplexer variants. It is a typical Multiplexer or Switches analog multiplexer. This analogue multiplexer requires a voltage of 1.4V~4.3V when it drains from a single voltage supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.
NX3L4053PW,118 Features
Switch Circuit: SPDT
-3db Bandwidth: 60MHz
NX3L4053PW,118 Applications
There are a lot of NXP USA Inc. NX3L4053PW,118 Analog Switches & Multiplexers ICs applications.
- Access Concentrators
- Fiber In The Loop (FITL)
- Voice over IP/DSL – Integrated Access Devices, Smart
- Industrial
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Industrial control systems
- Multi-Line E1 Interface Cards
- Audio and video switching
- Channel Banks
- Battery-powered systems
