NX3V1G384GW,125
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NX3V1G384 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Qualification Status | Not Qualified |
| Number of Circuits | 1 |
| -3db Bandwidth | 25MHz |
| On-State Resistance (Max) | 450mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 70pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 26ns, 10ns |
| Charge Injection | 12pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 43ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| Normal Position | NC |
| RoHS Status | ROHS3 Compliant |
NX3V1G384GW,125 Overview
Packed in 5-TSSOP, SC-70-5, SOT-353, the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. It is mounted in the position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~125°C TA are extended for operation. In total, there have been 5 terminations. A total of 5 pins are injected into the body of the electronic part. Based on SPST - NC switching circuits, these analog multiplexers work. There are 1 circuits in this multiplexer. Look for analog switch ic variants by searching with NX3V1G384. The analogue multiplexer in this example is a typical Multiplexer or Switches. The voltage required by this switch device is 1.4V~4.3V, draining from a single voltage supply.
NX3V1G384GW,125 Features
Switch Circuit: SPST - NC
-3db Bandwidth: 25MHz
NX3V1G384GW,125 Applications
There are a lot of NXP USA Inc. NX3V1G384GW,125 Analog Switches & Multiplexers ICs applications.
- PBXs
- Battery Powered Systems
- Avionics
- Avionics test equipment
- High-Voltage
- Cable PC
- SDH/SONET multiplexers
- Medical
- Fiber In The Loop (FITL)
- Audio and video routing
