NX3V1T66GM,115
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.65V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NX3V1T66G |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-N6 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| -3db Bandwidth | 25MHz |
| On-State Resistance (Max) | 450mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 70pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 28ns, 20ns |
| Charge Injection | 12pC |
| Switch-on Time-Max | 57ns |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| Normal Position | NO |
| Height Seated (Max) | 0.5mm |
| RoHS Status | ROHS3 Compliant |
NX3V1T66GM,115 Overview
As the electronic part is packed in 6-XFDFN, international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around -40°C~125°C TA. In total, there have been 6 terminations. This electronic part offers high-quality output due to its 1 channels. Turning on and running the electrical part should be easy with a 1.65V voltage supply. This electrical component is included in the 6 series of products. A SPST - NO switching circuit is used to build these analog multiplexers. 1 circuits are used in this analogue multiplexer. Try searching with NX3V1T66G to find analog multiplexer variants. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage of 1.4V~4.3V is required for this switch device, which drains from a single voltage source.
NX3V1T66GM,115 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 25MHz
NX3V1T66GM,115 Applications
There are a lot of NXP USA Inc. NX3V1T66GM,115 Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- Cable Modem
- Data Acquisition Systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- DSUs
- T1/E1 Terminals
- PDAs
- Avionics and Military Systems
- SDH
- Ultrasound
