NX3V1T66GM,132
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.65V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NX3V1T66G |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-N6 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| -3db Bandwidth | 25MHz |
| On-State Resistance (Max) | 450mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 70pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 28ns, 20ns |
| Charge Injection | 12pC |
| Switch-on Time-Max | 57ns |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| Normal Position | NO |
| Height Seated (Max) | 0.5mm |
| RoHS Status | ROHS3 Compliant |
NX3V1T66GM,132 Overview
Shipping overseas is convenient due to the electrical component's packing in 6-XFDFN. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. In total, there are 6 terminations. This electronic part offers high-quality output due to its 1 channels. An 1.65V voltage supply should allow the electrical part to be turned on and run. It is part of the design of the 6 series that this electronic component is included. On the other hand, analog switches can be constructed using SPST - NO switching circuits. A total of 1 circuits make up this switch device. Try searching for the analog switch ic with NX3V1T66G if you are looking for variants. This switch device is a typical Multiplexer or Switches. A voltage of 1.4V~4.3V is required for this switch device, which drains from a single voltage source.
NX3V1T66GM,132 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 25MHz
NX3V1T66GM,132 Applications
There are a lot of NXP USA Inc. NX3V1T66GM,132 Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Switching Systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Microprocessor Controlled Analog Systems
- Multi-Line E1 Interface Cards
- Cell phones
- SONET/SDH ADM
- Battery Powered Instruments
- Audio signal routing
- SONET
