NX3V1T66GW,125
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NX3V1T66G |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Qualification Status | Not Qualified |
| Number of Circuits | 1 |
| -3db Bandwidth | 25MHz |
| On-State Resistance (Max) | 450mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 70pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 28ns, 20ns |
| Charge Injection | 12pC |
| Switch-on Time-Max | 49ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| Normal Position | NO |
| RoHS Status | ROHS3 Compliant |
NX3V1T66GW,125 Overview
The electrical component comes in 5-TSSOP, SC-70-5, SOT-353 packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. The operating temperature is extended to around -40°C~125°C TA. A total of 5 terminations have been recorded. There is an electrical component included in the 5 series. A SPST - NO switching circuit is used to build these analog multiplexers. A total of 1 circuits make up this switch device. Try searching for NX3V1T66G variants of the analog switch ic. Theswitch device is a typical Multiplexer or Switches. An analogue multiplexer drains from a single voltage supply at 1.4V~4.3V.
NX3V1T66GW,125 Features
Switch Circuit: SPST - NO
-3db Bandwidth: 25MHz
NX3V1T66GW,125 Applications
There are a lot of NXP USA Inc. NX3V1T66GW,125 Analog Switches & Multiplexers ICs applications.
- FTTH
- Precision data acquisition
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- SONET
- Modems
- Cellular phones
- E1 Multiplexer
- ATM
- HDTV
- MP3 players
