OHN3177U
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 3-SSIP |
| Supplier Device Package | TO-92-3 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Bulk |
| Published | 2007 |
| Series | OHN3100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Hall Effect |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -20°C |
| Technology | Hall Effect |
| Voltage - Supply | 4.5V~24V |
| Function | Latch |
| Current - Supply (Max) | 7mA |
| Output Type | Open Collector |
| Max Output Current | 25mA |
| Operating Supply Voltage | 12V |
| Polarity | South Pole |
| Polarization | South Pole |
| Current - Output (Max) | 25mA |
| Max Supply Current | 7mA |
| Logic Function | Latch |
| Sensing Method | Hall Effect |
| Test Condition | -20°C ~ 85°C |
| Sensing Range | 1.5mT Trip, -1.5mT Release |
| RoHS Status | RoHS Compliant |
OHN3177U Overview
During packaging, the magnetic switch is protected against damage with the Bulk. For safety reasons, magnetic switches are packaged in 3-SSIP packages. Good performance is achieved by powering the magnetic switches with 7mA as the maximum current. The maximum current these switches can supply when they work is 25mA. Magnet switches should have a maximum current of 25mA in order to function correctly. These switches are capable of providing a maximum current of 7mA. For the magnetic switches, 85°C is the maximum operating temperature. The magnet switch should work, however, if the operating temperature is greater than -20°C. When the magnetic switch operates, it could supply 12V voltage.
OHN3177U Features
Packaging: Bulk
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Supply Voltage: 4.5V~24V
Operating Temperature: -20°C~85°C TA
Mounting Type: Through Hole
Output Type: Open Collector
Maximum Supply Current: 7mA
OHN3177U Applications
There are a lot of TT Electronics/Optek Technology OHN3177U Magnetic Switches applications.
- Monitor protections of the safety gates
- Speed and RPM (revolutions per minute) sensing
- Flow metering
- Spindles
- RPM measurement
- Detection of ferromagnetic
- Pumps
- Medication dispensing control
- Wiper home/end position sensor
- Position tracking
